HiPEM Lab - High Precision Electrical Measurements Laboratory
DEIB Research labs

HiPEM Lab - High Precision Electrical Measurements Laboratory

Responsible

Research Area

Web site

Activities

The laboratory is equipped with high-level instrumentation for the measurement of electrical quantities and the calibration of measurement instruments. It is located in an air-conditioned room: the temperature is maintained at 23 ± 1 ° C and the relative humidity is set at 50 ± 5%. The laboratory works according to ISO 9001 and ISO/IEC 17025 standards, and it is accredited by the Calibration Center of Athenaeum for the calibration of the instruments for the measurement of electrical quantities and thermo-hygrometers in fixed points.
The typical activities carried out by the laboratory are:

  • Metrological verification of digital and analog multimeters;
  • Metrological verification of standard generators (calibrators, standard resistors);
  • Thermo-hygrographs and thermo-hygrometers calibration;
  • Measurements of electrical materials properties;
  • Power and Energy measurements.

Service information

The activity takes place in the laboratory located in Building 7, ground floor (Piazza Leonardo da Vinci, 32).
For information contact Prof. Roberto Ottoboni (roberto.ottoboni@polimi.it)

Person working on a laptop in a technical lab, surrounded by electronic instruments such as an oscilloscope, signal generator, and measurement devices. Laboratory setup with an electronic measuring instrument featuring dual displays showing millivolt readings and calibration messages.